VPN to multiple sites help - Raspberry Pi Forums

-

hi

pi's use raspberry pi 3 revb raspbian 4.9

have 5 local sites 2 ethernet devices on each site. there overall wireless network witch covers sites.
problem local devices not allowed on overall network, think put raspberrypi on each site raspberrypi's
connect's wireless network via wlan0 , central vpn server (also raspberry pi) site site connection.
when laptop connect same vpn server via vpn client can access devices or if plug laptop on 1 of local lan's.

got dhcp server running on raspberrypi's not part manage setup vpn part.
client1: wlan0 ip overall wireless network dhcp. eth0 ip 192.168.11.0/24
client2: wlan0 ip overall wireless network dhcp. eth0 ip 192.168.12.0/24
client3: wlan0 ip overall wireless network dhcp. eth0 ip 192.168.13.0/24
client4: wlan0 ip overall wireless network dhcp. eth0 ip 192.168.14.0/24
client5: wlan0 ip overall wireless network dhcp. eth0 ip 192.168.15.0/24
vpn server: wlan0 overall wireless network ip 172.12.21.4 . eth0 ip 192.168.20.0/24

have tried around example of solution did not find right one. need advice setup server part , best way routing between different networks can access all.
hope done , willing out here ;o)

jesper



raspberrypi



Comments

Post a Comment

Popular posts from this blog

Error: ‘for’ loop initial declarations are only allowed in C99 or C11 mode - Raspberry Pi Forums

-
hey everyone, i'm trying compile simple code on rpi3 using geany. code written using code::blocks on windows , working without problem. errors i'm getting are: untitled.c:33:5: error: ‘for’ loop initial declarations allowed in c99 or c11 mode , untitled.c:33:5: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 compile code understand code not problem way i'm compiling it. can give me advice? you need add 1 of suggested options compile command configured in geany, in menu.. build -> set build commands add "-std=c99" after "gcc" in compile , build boxes. (i'm looking on mint pc expect version on pi same). petero raspberrypi
Read more

class MPU6050 has no member named begin

-
hi all, as working out scripts wich me make winddirection meter gy-87 calibrate compass sensor on board. i using script "hmc5883l_calibrate_mpu6050" korneliusz jarzebski. i fault "class mpu6050 has no member named begin" /*   calibrate hmc5883l + mpu6050 (gy-86 / gy-87). output hmc5883l_calibrate_processing.pde   read more: http://www.jarzebski.pl/arduino/czujniki-i-sensory/3-osiowy-magnetometr-hmc5883l.html   git: https://github.com/jarzebski/arduino-hmc5883l   web: http://www.jarzebski.pl   (c) 2014 korneliusz jarzebski */ #include <wire.h> #include <hmc5883l.h> #include <mpu6050.h> hmc5883l compass; mpu6050 mpu; int minx = 0; int maxx = 0; int miny = 0; int maxy = 0; int offx = 0; int offy = 0; void setup() {   serial.begin(9600);   // initialize mpu6050   while(!mpu.begin(mpu6050_scale_2000dps, mpu6050_range_2g))   {     delay(500);   } how slove error? any apreciated. kind regards, ilioss what compiler complainin
Read more

missing filename after '-o'

-
i'm new writing in arduino , trying program "ultimate robot kit blue". in uploading first motor test, error message keeps coming says: avr-g++: error: missing filename after '-o' exit status 1 error compiling. invalid library found in /users/dennisleary/documents/arduino/libraries/makeblock-libraries-master: /users/dennisleary/documents/arduino/libraries/makeblock-libraries-master invalid library found in /users/dennisleary/documents/arduino/libraries/makeblock-libraries-master: /users/dennisleary/documents/arduino/libraries/makeblock-libraries-master i've been trying robot , running quite time , appreciated! you have not installed library correctly or correct name.  however, did not post code , did not post complete message guessing.  not @ guessing.  please try again, following instructions follow. to post code and/or error messages: 1) use ctrl-t in arduino ide autoformat code. 2) paste autoformatted code between code tags (th
Read more